Monitor telemetry with Prometheus & Grafana

Challenge

It is important to gain operational and usage insight into a running Vault cluster for the purposes of understanding performance and assisting with proactive incident response, along with understanding business workloads, and use cases.

Operators and security practitioners need to be aware of conditions that can indicate potential performance implications to production users or security issues which require immediate attention.

Solution

Vault provides rich operational telemetry metrics that can be consumed by popular solutions for monitoring and alerting on key operational conditions.

One of the many ways that you can monitor Vault telemetry includes using the monitoring and alerting toolkit Prometheus, and visualizing the metric data with the Grafana observability platform.

Vault returns telemetry metrics from the /sys/metrics endpoint, and adding the format=prometheus parameter will result in Prometheus formatted metrics.

Scenario introduction

In this scenario, you will use Docker containers to deploy a Vault server, Prometheus monitoring, and a Grafana dashboard.

You will configure Vault to enable Prometheus metrics, and deploy the containers using the command line in a terminal session. You will also use the Grafana web interface to create a dashboard for visualizing metrics.

Begin the scenario by preparing your environment.

Prerequisites

To perform the steps in the hands on scenario, you need:

• Vault 1.8 or later binary installed in your system path; the Community Edition can be used for this tutorial.

• Docker Desktop

Prepare host environment

Create a temporary directory and some subdirectories to contain all of the work you will do in this scenario, and assign its path to the environment variable LEARN_VAULT.

$ mkdir -p /tmp/learn-vault-monitoring/{vault-config,vault-data} \    /tmp/learn-vault-monitoring/grafana-config \    /tmp/learn-vault-monitoring/prometheus-config && \    export LEARN_VAULT=/tmp/learn-vault-monitoring

Create a Docker network named learn-vault; this network will be used by all containers in the scenario.

$ docker network create --attachable --subnet 10.42.74.0/24 learn-vault

With the environment preparation complete, you are ready to start the Vault container.

Vault container

You will start a minimally configured Vault server using the filesystem storage backend and some initial configuration contained in the vault-config directory.

Begin by pulling the latest Vault image version.

$ docker pull hashicorp/vault:latest

Vault configuration

Prometheus metrics are not enabled by default; setting the prometheus_retention_time to a non-zero value enables them.

The example configuration includes a telemetry stanza to set a 12 hour retention time for metrics stored in memory. It also specifies that Vault should not emit Prometheus metrics prefixed with host names, as this is not desirable in most use cases.

api_addr  = "http://127.0.0.1:8200"listener "tcp" {  address     = "0.0.0.0:8200"  tls_disable = "true"}storage "file" {  path = "/vault/data"}telemetry {  disable_hostname = true  prometheus_retention_time = "12h"}

More telemetry configuration details are available in the telemetry parameters documentation.

Create the Vault server configuration.

$ cat > $LEARN_VAULT/vault-config/server.hcl << EOFapi_addr  = "http://127.0.0.1:8200"listener "tcp" {  address     = "0.0.0.0:8200"  tls_disable = "true"}storage "file" {  path = "/vault/data"}telemetry {  disable_hostname = true  prometheus_retention_time = "12h"}EOF

Start Vault container

The Vault container specifies the IPC_LOCK capability for memory locking, a static IP address, and some volume mounts in the project directory for configuration and data.

Start the Vault container running detached in the background.

$ docker run \    --cap-add=IPC_LOCK \    --detach \    --ip 10.42.74.100 \    --name learn-vault \    --network learn-vault \    -p 8200:8200 \    --rm \    --volume $LEARN_VAULT/vault-config:/vault/config \    --volume $LEARN_VAULT/vault-data:/vault/data \    hashicorp/vault server

Check the Vault server logs to ensure that the container is ready.

$ docker logs learn-vault 2>&1 | grep "Vault server started!"

When the Vault container is running, your output should resemble this example.

==> Vault server started! Log data will stream in below:

With the Vault container started and ready, proceed to preparing Vault for use.

Initialize, unseal & authenticate

The running Vault container publishes TCP port 8200 to the Docker host, so the Vault API address is http://127.0.0.1:8200.

Export the VAULT_ADDR environment variable value required for correctly addressing the Vault container.

$ export VAULT_ADDR=http://127.0.0.1:8200

For the purpose of simplicity in this tutorial, initialize Vault with 1 key share and a key threshold of 1 and write the output to the file .vault-init in the project directory.

$ vault operator init \    -key-shares=1 \    -key-threshold=1 \    | head -n3 \    | cat > $LEARN_VAULT/.vault-init

Successful execution of this command should produce no output.

Unseal Vault with the Unseal Key 1 value from the .vault-init file.

$ vault operator unseal \  $(grep 'Unseal Key 1'  $LEARN_VAULT/.vault-init | awk '{print $NF}')

Successful output from unsealing Vault should resemble this example:

Key             Value---             -----Seal Type       shamirInitialized     trueSealed          falseTotal Shares    1Threshold       1Version         1.8.4Storage Type    fileCluster Name    vault-cluster-5af38c1eCluster ID      5463b6ac-a3b8-01fa-fc6a-ab09981d7aa7HA Enabled      false

If your status output also shows Vault to be initialized and unsealed, you can login with vault login by passing the Initial Root Token value from the .vault-init file.

$ vault login -no-print \$(grep 'Initial Root Token' $LEARN_VAULT/.vault-init | awk '{print $NF}')

This command should produce no output when successful. If you want to confirm that the login was successful, try a token lookup and confirm that your token policies contain root.

$ vault token lookup | grep policies

Successful output should contain the following.

policies            [root]

Define Prometheus ACL Policy

The Vault /sys/metrics endpoint is authenticated. Prometheus requires a Vault token with sufficient capabilities to successfully consume metrics from the endpoint.

Define a prometheus-metrics ACL policy that grants read capabilities to the metrics endpoint.

$ vault policy write prometheus-metrics - << EOFpath "/sys/metrics" {  capabilities = ["read"]}EOF

Create an example token with the prometheus-metrics policy attached that Prometheus will use for authentication to access the Vault telemetry metrics endpoint.

Write the token ID to the file prometheus-token in the Prometheus configuration directory.

$ vault token create \  -field=token \  -policy prometheus-metrics \  > $LEARN_VAULT/prometheus-config/prometheus-token

This command is expected to produce no output.

The Vault server is now prepared to properly expose telemetry metrics for Prometheus consumption, and you have created the token that Prometheus will use to access the metrics.

Prometheus container

Before you can start the Prometheus container, you must first create the configuration file prometheus.yml.

$ cat > $LEARN_VAULT/prometheus-config/prometheus.yml << EOFscrape_configs:  - job_name: vault    metrics_path: /v1/sys/metrics    params:      format: ['prometheus']    scheme: http    authorization:      credentials_file: /etc/prometheus/prometheus-token    static_configs:    - targets: ['10.42.74.100:8200']EOF

The configuration is minimal, and specifies a scrape config job named vault with the Vault API endpoint as the metrics path, along with the path to the Vault token and the IP address plus port of the Vault server.

Pull the Prometheus image.

$ docker pull prom/prometheus

Start the Prometheus container using volume mounts that point to the previously created configuration and Vault token file.

$ docker run \    --detach \    --ip 10.42.74.110 \    --name learn-prometheus \    --network learn-vault \    -p 9090:9090 \    --rm \    --volume $LEARN_VAULT/prometheus-config/prometheus.yml:/etc/prometheus/prometheus.yml \    --volume $LEARN_VAULT/prometheus-config/prometheus-token:/etc/prometheus/prometheus-token \    prom/prometheus

Verify that Prometheus is ready to receive requests.

$  docker logs learn-prometheus 2>&1 | grep -i "server is ready"

The log should contain an entry like this one.

ts=2024-06-06T15:14:55.143Z caller=main.go:1114 level=info msg="Server is ready to receive web requests."

Prometheus is ready; continue with Grafana container configuration and deployment.

Grafana container

Create a Grafana configuration that specifies the Prometheus container as the data source. This way, you can focus on metrics and dashboards instead of setting up the data source in the Grafana web UI.

$ cat > $LEARN_VAULT/grafana-config/datasource.yml << EOF# config file versionapiVersion: 1datasources:- name: vault  type: prometheus  access: server  orgId: 1  url: http://10.42.74.110:9090  password:  user:  database:  basicAuth:  basicAuthUser:  basicAuthPassword:  withCredentials:  isDefault:  jsonData:     graphiteVersion: "1.1"     tlsAuth: false     tlsAuthWithCACert: false  secureJsonData:    tlsCACert: ""    tlsClientCert: ""    tlsClientKey: ""  version: 1  editable: trueEOF

Pull the latest Grafana image.

$ docker pull grafana/grafana:latest

Start the Grafana container.

$ docker run \    --detach \    --ip 10.42.74.120 \    --name learn-grafana \    --network learn-vault \    -p 3000:3000 \    --rm \    --volume $LEARN_VAULT/grafana-config/datasource.yml:/etc/grafana/provisioning/datasources/prometheus_datasource.yml \    grafana/grafana

Verify that the Grafana container is ready.

$  docker logs learn-grafana 2>&1 | grep "HTTP Server Listen"

The log should contain an entry like this one.

t=2021-10-19T13:13:51+0000 lvl=info msg="HTTP Server Listen" logger=http.server address=[::]:3000 protocol=http subUrl= socket=

You can also optionally check once more to verify that all containers are up and running.

$ docker ps -f name=learn --format "table {{.Names}}\t{{.Status}}"

The output should resemble this example:

NAMES              STATUSlearn-grafana      Up 21 secondslearn-prometheus   Up 54 secondslearn-vault        Up 2 minutes

With all containers ready, move on to accessing and configuring Grafana through the web UI.

Access and configure Grafana dashboard

Access the Grafana web interface to create a dashboard containing some example Vault metrics.

1. Open http://localhost:3000/ in a browser.

2. Enter admin for both the Email or username and password fields.

3. When prompted, change the admin password and confirm it.

4. Click the Dashboards icon in the navigation and select Manage

   

5. Click New Dashboard.

   

6. Click Add an empty panel to add the first new panel for a metric from Vault.

   

Add a memory utilization graph

Let's add a graph to the dashboard for Vault memory utilization.

In the New dashboard/Edit Panel page, use the following steps to add the graph.

1. In the Data source drop-down, choose vault.

   

2. In the Metrics browser text input, notice that you can begin to type vault_ and Grafana will complete metric names for you from a listing. To specify the system memory usage of Vault, enter vault_runtime_sys_bytes here.

3. Under Panel options in the navigation, enter System memory utilization for Title.

   

4. Scroll down to Graph styles and select Bars.

   

5. Scroll to Standard options and use the drop-down to navigate to Data and select bytes(SI).

   

6. Click Apply

Your dashboard should resemble this example screenshot.

You can add more panels with the Add panel button shown in the screen shot.

Add a request handling graph

Add another panel to measure request handling.

1. In the Data source drop-down, choose vault.

   

2. In the Metrics browser text input, notice that you can begin to type vault_ and Grafana will complete metric names for you from a listing. To specify the system memory usage of Vault, enter vault_core_handle_request_count here.

3. Under Panel options in the navigation, enter Requests handled count for Title.

4. Click Apply

Generate requests with token lookup

To generate work for the new request handling graph, go to your terminal session and perform 100 token lookup operations.

$ for i in {1..100}; do vault token lookup; done

Return to the Grafana web UI and if necessary, click the refresh button.

Now observe your Grafana dashboard.

It should resemble this example screenshot, showing 100+ requests handled.

Feel free to experiment, and add more panels and metrics types to your dashboard.

Cleanup

Stop and remove the Docker containers.

$ docker stop learn-grafana learn-prometheus learn-vault

Remove the Docker network.

$ docker network rm learn-vault

Remove the project directory.

$ rm -r /tmp/learn-vault-monitoring

Summary

You learned how to configure a Vault server to enable Prometheus metrics with a specific retention time and hostname setting. You also learned how to enable Prometheus metrics scraping and Grafana metrics visualization with dashboard panels.

Resources

• Telemetry Metrics Reference
• Telemetry
• telemetry configuration stanza
• Prometheus specific telemetry configuration
• Monitor Telemetry & Audit Device Log Data